Outline

This double-component product is epoxy adhesive. It is easy and convenient to use for it solidifies fast at normal temperature and bonds well. No bubbles appear after curing thus making the surface smooth and bright. The series has two categories, room temperature curing and heat curing. Its viscocity, color and heat-resistance quality are adjustable.

Applications

It applies to the encapsulating electronic components and chips in transformers, rectifiers, AC capacitor, ignition coils, electronic modules, negative ion generator, atomizer, and other products to protect them against moisture, chemicals, excessive heat, vibration, mechanical impact and thermal shocks.

Features

Component A is pasty, non-solid particle. component B is in tinted paste shape.

Fast curing velocity. At 25C, within 1-3 hours, it is at the early stage of curing, 12 hours later, it reaches its maximum bonding strength.

Being durable and resistant to ultraviolet light once the bond has formed.

Being heat-resistant, it adapts to a wide range of temperature and bonds well under high temperature.

Mix the two components in a certain proportion, apply it to the surface of the substrates directly, which makes it so convenient to use.

You.ll get long term durability and resistance to moisture, chemicals, oils, and temperature extremes.

Non-toxic after solidification, though it is a little smelly.

Being stable, its storage time is one and a half year.

The main technical parameters are as follows:

Heat resistance scope-40C+ 380C

volume resistance: 11015.cm sheet resistance   2.51015

voltage withstand  20-24kV/mm         hardness  shore D 90

Water absorbing capacity 24h0.1%     Tg:300-400

Cementation intensity:   Tensile strength25MPa; Shearing strength20 MPa

Instruction

1. To get the best results, the two surfaces being bonded should be free of oils, dirt, moisture and other contaminants and should be slightly roughed or sanded to remove gloss.

2. Mix A and B in a proportion of 10:1.2--1.5 to get perfect bonding result at fastest speed at 25 C.

3. Spread the mixture on the substrates, put them together and apply some strength on them, finally, let them dry for 2-4 hours.

Notes

1.The tools used to get adhesives should have exclusive usage.

2. It is necessary to keep it well ventilated and away from fire .

3.If it has contact with skin, you should wash thoroughly with soap and water.

4. It can be stored at well-ventilated places with low temperature, and keep them away from fire. Cover the lip after using it.